Get Your AC, Richardson TX: How to Choose the Right Type of Residential Air Conditioner

Truficient HVAC Services > News > AC Basics > Get Your AC, Richardson TX: How to Choose the Right Type of Residential Air Conditioner

Get Your AC, Richardson TX: How to Choose the Right Type of Residential Air Conditioner

  • Posted by: Eder Teixeira
AC richardson

Buying an air conditioner? Do you live in Richardson, TX?

With a climate situation such as Richardson, TX, finding the right air conditioner is a big deal. It gets hot between June and September. With temperatures reaching towards 96 degrees Fahrenheit.

Air conditioners tend to use up about 6% of all electricity produced in the United States. This leaves an annual cost of about $29 billion for homeowners. Avoid this problem by getting a more efficient unit!

Don’t know which AC Richardson, TX supplier to turn to? Uncertain about which type of AC works best on your home?

We’ve got you covered. Here are some factors to note:

1. Know the Right AC Type for Your Home

The first part that you should consider is which of the types of air conditioner units you should go for. There are about four types of central air conditioning systems. Each has a design and niche to where they would be at their highest efficiency.

Here are the four types of air conditioning units:

1.1. Split System

This is the most common air conditioner type found in the US.  It has two components that play distinct roles in the system.

First is the evaporator coil, set inside the house and tucked in a cabinet. This is the one responsible for removing heat and moisture from the air.

The other is the condenser coil. This one is set outside the house in a metal case. It handles the releasing of heat.

Together with the condenser coil is the compressor. This pumps refrigerant back and forth between the two coils.

Following this, the indoor component of the AC connects to a network of ducts. A blower circulates the cold air through these ducts to reach all areas in the house.

This AC model works well in a house with a central furnace. This is because it can share the ductwork that the heating system is using.

1.2. Heat Pump

This is a variation of the traditional split system. This unit pump heat from the house and release it outside during the hot summer months. When winter hits, it does the reverse where it draws heat from the outdoor hair and uses it to heat up the house.

This sort of dual functionality is perfect for mild climates. This only fails in colder locations as such areas tend to stay below freezing temperatures for a long time.

It’s important to note there are also special heat pumps available. A ground-source or geothermal heat pump, for example, is capable of drawing heat out of the ground. This makes it suitable even for places plagued with long winter months.

While it has an impressive benefit when it comes to long-term energy savings, this type costs more than other HVAC systems.

1.3. Packaged Central Air Conditioner

This bring the evaporator, condenser, as well as the compressor into one, unified unit. This unit is usually on a concrete slab close to the foundation, or on the roof.

Packaged central units keep run the ducts through the exterior wall or roof. It can suck in air from inside the house and then return with cooled air.

This is best used in small commercial buildings, combined with a set of heating coils or a natural gas furnace. A separate furnace in the building would not be necessary.

1.4. Ductless Mini-Split System

If the house doesn’t have ductwork, this model should suit you. It has similarities with the basic split system. This unit combines the outdoor compressor unit and the condenser with the indoor air-handling units.

Mounted high on the wall, these units have blowers attached to the main system. The tubing connecting the indoor and outdoor units circulates the refrigerant between these two.

A notable feature for this system is that the rooms that have the indoor units only cover that room.

It is an effective system as it does not need ducts, eliminating the need to tear up walls. The independent control is another advantage.

The only disadvantage is the cost. There’s no denying these are expensive HVAC units.

A cost-effective solution would be to use mini-splits only if you want to cool certain rooms. However, mini-splits do not work well for the whole house, costing a bit more than a ducted setup.

2. Check the Climate

Before buying any of the air conditioning types we mentioned earlier.

Take a look at the climate you have in your area. The southern areas in North America tend to have warmer weather for most of the year. Not all heating and air conditioning equipment work well in that kind of climate.

With that said, a good suggestion is to use heat pumps and air handlers for this setup.

In this case, the heat pump is perfect for how it draws heat from the air and converting it into cold air inside. Meanwhile, an air handler will ensure that the air circulates within the home.

Consider giving your home an indoor air quality test as well.

Colder climates may need both an air conditioner and a furnace. More so towards the northern areas. This covers the heating and air conditioning. As temperatures get colder at a frequent rate in those areas.

3. Have the Correct Size for Your AC

An important aspect that you should consider when picking out from the AC types available is to get the right size. This is not only about the size of the unit. You also have to consider the rate at which it supplies heating or cooling.

When you buy a new air conditioning unit, the installer needs to know the size of the home. This way, they will calculate how much cooling and heating capacity it must have to ensure the occupants remain comfortable. They refer to this as the load.

By knowing the load, the contractor you chose for the installation can determine if the system you are picking has the right size.

Having the wrong size for your heating-cooling system can cause problems. If the cooling system is too big, the temperature cools down quicker. However, it won’t run long enough to remove enough moisture in the air.

The result would be to turn down the thermostat to make the air conditioner run longer. The problem in this is that it will cause the utility bills to run high. Not only that, the insufficient removal of moisture can result in mold growth and other moisture-related damages.

Get the Right AC Richardson, TX Unit Today!

For a place such as Richardson, TX, finding the right air conditioner model and type requires a more thought-out process. Take note of your climate, the type of model that works for your home. And the right size to cover both heat and moisture.

Figured out now which AC Richardson unit to buy but need a supplier? When it comes to heating and air conditioning solutions, you can contact us today. We can help you with any questions that you have.

Author: Eder Teixeira

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.